PL2122701-216 — STANDOFF,THREADED,SPACING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

PL2122701-216: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 2.250 INCHES NOMINAL IN, diameter: 0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN, groove_width: 0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, groove_diameter: 0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN, special_features: 0.314 IN. MIN 0.324 IN.

MAX DIA HOLE THROUGH PIN AXIAL UNTHREDED PORTION IN, style_designator: LEFT INTERNAL THREAD. This part is cataloged in the U.S. Government catalog under NSN 5340-00-922-3503, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PL2122701-216

NSN: 5340-00-922-3503
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

length	2.250 INCHES NOMINAL IN
diameter	0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
groove_width	0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
groove_diameter	0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN
special_features	0.314 IN. MIN 0.324 IN. MAX DIA HOLE THROUGH PIN AXIAL UNTHREDED PORTION IN
style_designator	LEFT INTERNAL THREAD
cross-sectional_shape	ROUND
left_end_chamfer_angle	12.5 DEGREES NOMINAL
right_end_chamfer_angle	12.5 DEGREES NOMINAL
NSN	5340-00-922-3503

COMPONENT DIAGRAM

KEY FEATURES

•

LEFT END CHAMFER ANGLE: 12.5 DEGREES NOMINAL

•

LENGTH: 2.250 INCHES NOMINAL IN

•

GROOVE DIAMETER: 0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: LEFT INTERNAL THREAD

•

DIAMETER: 0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN

•

RIGHT END CHAMFER ANGLE: 12.5 DEGREES NOMINAL

•

CROSS-SECTIONAL SHAPE: ROUND

TECHNICAL CHARACTERISTICS

LEFT END CHAMFER ANGLE	12.5 DEGREES NOMINAL
LENGTH	2.250 INCHES NOMINAL IN
GROOVE DIAMETER	0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN
STYLE DESIGNATOR	LEFT INTERNAL THREAD
DIAMETER	0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
RIGHT END CHAMFER ANGLE	12.5 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE	ROUND
SPECIAL FEATURES	0.314 IN. MIN 0.324 IN. MAX DIA HOLE THROUGH PIN AXIAL UNTHREDED PORTION IN
GROOVE WIDTH	0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 4

2122700-216Reference document

Same NSN cross-reference

Reference document — Secondary reference

2122704-8Reference document

Same NSN cross-reference

Reference document — Secondary reference

2122702-216Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

SRS2122700Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy PL2122701-216?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PL2122701-216?

PL2122701-216 is a STANDOFF,THREADED,SPACING.

What parts can replace PL2122701-216?

There are 4 known substitutes for PL2122701-216: 2122700-216, 2122704-8, 2122702-216 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for PL2122701-216?

PL2122701-216 is cataloged in the U.S. Government catalog under NSN 5340-00-922-3503. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PL2122701-216 — STANDOFF,THREADED,SPACING

Request a Quote — PL2122701-216