2122704-8 — RETAINER,PACKING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2122704-8: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, joint_type: SCARF-BEARING SURFACE RETAINER, peripheral_diameter: 0.758 INCHES NOMINAL IN, center_hole_diameter: 0.617 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN, cross-sectional_height: 0.064 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-922-3503, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2122704-8

NSN: 5340-00-922-3503
NIINs: 009223503, 011474928
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

material	PLASTIC POLYAMIDE NYLON OVERALL
joint_type	SCARF-BEARING SURFACE RETAINER
peripheral_diameter	0.758 INCHES NOMINAL IN
center_hole_diameter	0.617 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
cross-sectional_height	0.064 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
cross-sectional_shape_style	SQUARE/RECTANGULAR
material_document_and_classification	101 FSCM 83616 MFR REF SINGLE MATERIAL RESPONSE OR ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5340-00-922-3503

COMPONENT DIAGRAM

KEY FEATURES

•

LEFT END CHAMFER ANGLE: 12.5 DEGREES NOMINAL

•

LENGTH: 2.250 INCHES NOMINAL IN

•

GROOVE DIAMETER: 0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: LEFT INTERNAL THREAD

•

DIAMETER: 0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN

•

RIGHT END CHAMFER ANGLE: 12.5 DEGREES NOMINAL

•

CROSS-SECTIONAL SHAPE: ROUND

TECHNICAL CHARACTERISTICS

LEFT END CHAMFER ANGLE	12.5 DEGREES NOMINAL
LENGTH	2.250 INCHES NOMINAL IN
GROOVE DIAMETER	0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN
STYLE DESIGNATOR	LEFT INTERNAL THREAD
DIAMETER	0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
RIGHT END CHAMFER ANGLE	12.5 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE	ROUND
SPECIAL FEATURES	0.314 IN. MIN 0.324 IN. MAX DIA HOLE THROUGH PIN AXIAL UNTHREDED PORTION IN
GROOVE WIDTH	0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 4

PL2122701-216Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2122700-216Reference document

Same NSN cross-reference

Reference document — Secondary reference

2122702-216Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

SRS2122700Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2122704-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2122704-8?

2122704-8 is a RETAINER,PACKING.

What parts can replace 2122704-8?

There are 4 known substitutes for 2122704-8: PL2122701-216, 2122700-216, 2122702-216 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2122704-8?

2122704-8 is cataloged in the U.S. Government catalog under NSN 5340-00-922-3503. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2122704-8 — RETAINER,PACKING

Request a Quote — 2122704-8