PartsTable
Technical Data Sheet
PartsTable / O-RING / P48026-330
P48026-330 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN, center_hole_diameter: 2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-579-1070, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P48026-330
NSN: 5331-00-579-1070
FSC: 5331 — O-RING
CAGE: 70106 — ACUSHNET RUBBER COMPANY, INC. DBA PRECIX (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
center_hole_diameter2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-00-579-1070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P48026-330 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
50076AInterchangeable
interchangeable cross-reference
interchangeable
SC-B-70017-23Interchangeable
interchangeable cross-reference
interchangeable
62233Interchangeable
interchangeable cross-reference
interchangeable
5331PL1322544Interchangeable
interchangeable cross-reference
interchangeable
51561A222Interchangeable
interchangeable cross-reference
interchangeable
19-000-0576Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P48026-330?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P48026-330?
P48026-330 is a O-RING.
What parts can replace P48026-330?
There are 17 known substitutes for P48026-330: 50076A, SC-B-70017-23, 62233 and 14 more. Substitute compatibility should be verified for your specific system.
Is P48026-330 still available?
P48026-330 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P48026-330

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026