PartsTable
Technical Data Sheet
PartsTable / O-RING / 19-000-0576
19-000-0576 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.520 INCHES NOMINAL IN, center_hole_diameter: 2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-579-1070, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19-000-0576
NSN: 5331-00-579-1070
FSC: 5331 — O-RING
CAGE: INTE9 — NATO STOCK NUMBER POTENTIAL INTERCHANGEABILITY LINK
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter2.520 INCHES NOMINAL IN
center_hole_diameter2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
material_document_and_classificationMIL-P-83461 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-00-579-1070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19-000-0576 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
50076AInterchangeable
interchangeable cross-reference
interchangeable
SC-B-70017-23Interchangeable
interchangeable cross-reference
interchangeable
62233Interchangeable
interchangeable cross-reference
interchangeable
5331PL1322544Interchangeable
interchangeable cross-reference
interchangeable
51561A222Interchangeable
interchangeable cross-reference
interchangeable
19-000-0576Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19-000-0576?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19-000-0576?
19-000-0576 is a O-RING.
What parts can replace 19-000-0576?
There are 18 known substitutes for 19-000-0576: 50076A, SC-B-70017-23, 62233 and 15 more. Substitute compatibility should be verified for your specific system.
Is 19-000-0576 still available?
19-000-0576 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19-000-0576

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026