PartsTable
Technical Data Sheet
Download PDF

P342-0141-00 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

P342-0141-00: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.089 INCHES MINIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-720-8695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P342-0141-00
NSN: 5305-00-720-8695
FSC: 5305 — Screws
CAGE: 77250 — ALLIED PRODUCTS CORP PHEOLL MFG CO DIV (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.089 INCHES MINIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentNICKEL
NSN5305-00-720-8695
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: P342-0141-00 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: NICKEL
•
FASTENER LENGTH: 0.125 INCHES NOMINAL IN
•
THREAD LENGTH: 0.089 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTNICKEL
FASTENER LENGTH0.125 INCHES NOMINAL IN
THREAD LENGTH0.089 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
P342-0141-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-92Reference document
Same NSN cross-reference
Reference document — Identification reference
342-0141-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P342-0141-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P342-0141-00?
P342-0141-00 is a SCREW,MACHINE.
What parts can replace P342-0141-00?
There are 3 known substitutes for P342-0141-00: P342-0141-000, FF-S-92, 342-0141-000. Substitute compatibility should be verified for your specific system.
What is the NSN for P342-0141-00?
P342-0141-00 is cataloged in the U.S. Government catalog under NSN 5305-00-720-8695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P342-0141-00