PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NCL-3/16
NCL-3/16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The NCL-3/16 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-8446, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NCL-3/16
NSN: 5340-00-619-8446
FSC: 5340
CAGE: 92194 — BELDEN, INC. (USA)
SPECIFICATIONS
Part NumberNCL-3/16
NSN5340-00-619-8446
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NCL-3/16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.342 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.580 INCHES NOMINAL IN
•
DIAMETER: 0.167 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.342 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.580 INCHES NOMINAL IN
DIAMETER0.167 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLACK
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
10-30492-2Interchangeable
interchangeable cross-reference
interchangeable
10038-2Interchangeable
interchangeable cross-reference
interchangeable
F4NY-187BK-167Interchangeable
Same NIIN cross-reference
interchangeable
1530-1277Interchangeable
Same NIIN cross-reference
interchangeable
211&008&9104Interchangeable
Same NIIN cross-reference
interchangeable
2507626-17Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NCL-3/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NCL-3/16?
NCL-3/16 is a NCL-3/16.
What parts can replace NCL-3/16?
There are 6 known substitutes for NCL-3/16: 10-30492-2, 10038-2, F4NY-187BK-167 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NCL-3/16?
NCL-3/16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-8446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NCL-3/16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026