PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F4NY-187BK-167
F4NY-187BK-167 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-8446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F4NY-187BK-167
NSN: 5340-00-619-8446
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.188 INCHES NOMINAL IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.580 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.342 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN
NSN5340-00-619-8446
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F4NY-187BK-167 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.342 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.580 INCHES NOMINAL IN
•
DIAMETER: 0.167 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.342 INCHES MINIMUM AND 0.404 INCHES MAXIMUM IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.580 INCHES NOMINAL IN
DIAMETER0.167 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLACK
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
10-30492-2Interchangeable
interchangeable cross-reference
interchangeable
10038-2Interchangeable
interchangeable cross-reference
interchangeable
1530-1277Interchangeable
Same NIIN cross-reference
interchangeable
NCL-3/16Interchangeable
Same NIIN cross-reference
interchangeable
211&008&9104Interchangeable
Same NIIN cross-reference
interchangeable
2507626-17Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F4NY-187BK-167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F4NY-187BK-167?
F4NY-187BK-167 is a CLAMP,LOOP.
What parts can replace F4NY-187BK-167?
There are 6 known substitutes for F4NY-187BK-167: 10-30492-2, 10038-2, 1530-1277 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F4NY-187BK-167?
F4NY-187BK-167 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-8446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F4NY-187BK-167

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026