PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NASM35275-222
NASM35275-222 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, hole_diameter: 0.037 INCHES NOMINAL IN, thread_length: 1.075 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-282-4050, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NASM35275-222
NSN: 5305-00-282-4050
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
hole_diameter0.037 INCHES NOMINAL IN
hole_quantity1
thread_length1.075 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length1.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-282-4050
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NASM35275-222 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
•
FASTENER LENGTH: 1.125 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
THREAD LENGTH: 1.075 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
FASTENER LENGTH1.125 INCHES NOMINAL IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
NOMINAL THREAD DIAMETER0.112 INCHES IN
SCREW SURFACE TREATMENTCADMIUM
THREAD LENGTH1.075 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD HOLE CONFIGURATION STYLEROUND
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
AN500A10-14Interchangeable
interchangeable cross-reference
interchangeable
AN500Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1ANDSTYLE5SInterchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1ANDSTYLE5Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
interchangeable cross-reference
interchangeable
4-40NC2AX1-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NASM35275-222?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM35275-222?
NASM35275-222 is a SCREW,MACHINE.
What parts can replace NASM35275-222?
There are 13 known substitutes for NASM35275-222: AN500A10-14, AN500, FFS92ANDTYPE1ANDSTYLE5S and 10 more. Substitute compatibility should be verified for your specific system.
Is NASM35275-222 still available?
NASM35275-222 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NASM35275-222

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026