PartsTable
Technical Data Sheet
Download PDF

FFS92ANDTYPE1ANDSTYLE5S — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS92ANDTYPE1ANDSTYLE5S: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.792 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-144-3889, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE1ANDSTYLE5S
NSN: 5305-00-144-3889
NIINs: 001443889, 001443894, 001443896, 001443900, 001443907, 001509646, 001509649, 001509695, 001509717, 001510378, 001510382, 001510386, 001510391, 001510560, 001562716, 001562718, 001562940, 001562942, 001800038, 001834003, 002811563, 002823976, 002824112, 002824196, 002829496, 002978199, 002978235, 005434925, 005794554, 005794576
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
hole_diameter0.046 INCHES NOMINAL IN
hole_quantity1
thread_length0.792 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.875 INCHES NOMINAL IN
special_featuresONE DRILLED HOLE
thread_directionRIGHT-HAND
internal_drive_styleSLOT
NSN5305-00-144-3889
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE1ANDSTYLE5S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.139 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.875 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.792 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.139 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.875 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH0.792 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.216 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY HEAD DIMENSIONS AND THREAD SIZE
SCREW MATERIALSTEEL OR STEEL COMP 1010
SUBSTITUTES & CROSS-REFERENCES 2
AN500A10-14Reference document
Same NSN cross-reference
Reference document — Identification reference
AN500Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy FFS92ANDTYPE1ANDSTYLE5S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE1ANDSTYLE5S?
FFS92ANDTYPE1ANDSTYLE5S is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE1ANDSTYLE5S?
There are 2 known substitutes for FFS92ANDTYPE1ANDSTYLE5S: AN500A10-14, AN500. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE1ANDSTYLE5S?
FFS92ANDTYPE1ANDSTYLE5S is cataloged in the U.S. Government catalog under NSN 5305-00-144-3889. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE1ANDSTYLE5S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.