Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, arch_radius: 0.625 INCHES NOMINAL IN, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 2.514 INCHES NOMINAL IN, special_features: SIZE 1/2 IN. THIN WALL EMT CONDUIT IN.
This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-022-4170, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NASM 760
NSN:5340-00-022-4170 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
cushion
NOT INCLUDED
material
STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
arch_radius
0.625 INCHES NOMINAL IN
mounting_pad
NOT INCLUDED
overall_width
0.375 INCHES NOMINAL IN
overall_length
2.514 INCHES NOMINAL IN
special_features
SIZE 1/2 IN. THIN WALL EMT CONDUIT IN
style_designator
CURVED ARCH
surface_treatment
CADMIUM AND CHROMATE
material_thickness
0.038 INCHES NOMINAL IN
mounting_hole_size
0.173 INCHES NOMINAL IN
inside_diameter/arch_length
1.750 INCHES NOMINAL IN
NSN
5340-00-022-4170
COMPONENT DIAGRAM
KEY FEATURES
•
INSIDE DIAMETER/ARCH LENGTH: 4.438 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN
•
MOUNTING HOLE SIZE: 0.641 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
DEPARTURE FROM CITED DOCUMENT: PART NO. MS36140-23 AS MOD BY RQMT QHWQ
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
NONDEFINITIVE SPEC/STD DATA: 2 FIGURE AND 1 TYPE AND B STYLE
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER/ARCH LENGTH
4.438 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN
MOUNTING HOLE SIZE
0.641 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
MATERIAL
STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM 760?
NASM 760 is a STRAP,RETAINING.
What parts can replace NASM 760?
There are 12 known substitutes for NASM 760: FF-S-760, 167A33, NASM760-TYP1, STYB, 5/16 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM 760?
NASM 760 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-022-4170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.