Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: IRON CAST UNS F22400 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN, overall_length: 8.625 INCHES MINIMUM AND 8.875 INCHES MAXIMUM IN, style_designator: HALF ARCH. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-6773, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
PTMC400
NSN:5340-00-190-6773 FSC:5340 CAGE:72629 — GENERAL CABLE CO DIV OF GK TECHNOLOGIES INC DIAMOND EXPANSION BOLT CO DIV (USA)
SPECIFICATIONS
cushion
NOT INCLUDED
material
IRON CAST UNS F22400 LOCATION NOT OTHERWISE SPECIFIED
mounting_pad
NOT INCLUDED
overall_width
1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
overall_length
8.625 INCHES MINIMUM AND 8.875 INCHES MAXIMUM IN
style_designator
HALF ARCH
surface_treatment
CADMIUM AND CHROMATE OR ZINC AND CHROMATE
material_thickness
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
mounting_hole_size
0.641 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
inside_diameter/arch_length
4.500 INCHES MINIMUM AND 4.562 INCHES MAXIMUM IN
nondefinitive_spec/std_data
1 TYPE AND A STYLE
distance_between_base_and_inside_of_arch
4.438 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN
NSN
5340-00-190-6773
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
MATERIAL: IRON CAST UNS F22400 LOCATION NOT OTHERWISE SPECIFIED
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND A STYLE
•
STYLE DESIGNATOR: HALF ARCH
•
MOUNTING HOLE SIZE: 0.641 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH
8.625 INCHES MINIMUM AND 8.875 INCHES MAXIMUM IN
SURFACE TREATMENT
CADMIUM AND CHROMATE OR ZINC AND CHROMATE
MATERIAL
IRON CAST UNS F22400 LOCATION NOT OTHERWISE SPECIFIED
NONDEFINITIVE SPEC/STD DATA
1 TYPE AND A STYLE
STYLE DESIGNATOR
HALF ARCH
OVERALL WIDTH
1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
MOUNTING HOLE SIZE
0.641 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
CUSHION
NOT INCLUDED
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PTMC400?
PTMC400 is a STRAP,RETAINING.
What parts can replace PTMC400?
There are 12 known substitutes for PTMC400: FFS760, MS35140-23, NASM760 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PTMC400?
PTMC400 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-6773. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.