Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: THREADED, thread_class: 3B, overall_diameter: 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN, inside_diameter_length: 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN, round_cap_outside_surface_condition: RIBBED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-097-8277, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NAS832-8
NSN:5340-01-097-8277 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
material
PLASTIC
design_type
THREADED
thread_class
3B
overall_diameter
0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
inside_diameter_length
0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
round_cap_outside_surface_condition
RIBBED
material_document_and_classification
L-P-390, TYPE 1, CLASS A FED SPEC SINGLE MATERIAL RESPONSE
thread_size_and_series/type_designator
3/4-16 UNF
NSN
5340-01-097-8277
COMPONENT DIAGRAM
KEY FEATURES
•
THREAD CLASS: 3B
•
MATERIAL: PLASTIC
•
ROUND CAP OUTSIDE SURFACE CONDITION: RIBBED
•
DESIGN TYPE: THREADED
•
INSIDE DIAMETER LENGTH: 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 3/4-16 UNF
•
OVERALL DIAMETER: 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS A FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS
3B
MATERIAL
PLASTIC
ROUND CAP OUTSIDE SURFACE CONDITION
RIBBED
DESIGN TYPE
THREADED
INSIDE DIAMETER LENGTH
0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR
3/4-16 UNF
OVERALL DIAMETER
0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
L-P-390, TYPE 1, CLASS A FED SPEC SINGLE MATERIAL RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS832-8?
NAS832-8 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace NAS832-8?
There are 21 known substitutes for NAS832-8: 890336-32, M5501/11-F14, MIL-C-5501/11 and 18 more. Substitute compatibility should be verified for your specific system.
Is NAS832-8 still available?
NAS832-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.