Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: THREADED, thread_class: 3B, overall_diameter: 0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, inside_diameter_length: 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN, round_cap_outside_surface_condition: RIBBED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-167-9314, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M5501/11-F7
NSN:5340-01-167-9314 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
PLASTIC
design_type
THREADED
thread_class
3B
overall_diameter
0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
inside_diameter_length
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
round_cap_outside_surface_condition
RIBBED
material_document_and_classification
L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
thread_size_and_series/type_designator
5/8-18 UNF
NSN
5340-01-167-9314
COMPONENT DIAGRAM
KEY FEATURES
•
THREAD CLASS: 3B
•
ROUND CAP OUTSIDE SURFACE CONDITION: RIBBED
•
DESIGN TYPE: THREADED
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 5/8-18 UNF
•
INSIDE DIAMETER LENGTH: 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
•
OVERALL DIAMETER: 0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS
3B
ROUND CAP OUTSIDE SURFACE CONDITION
RIBBED
DESIGN TYPE
THREADED
THREAD SIZE AND SERIES/TYPE DESIGNATOR
5/8-18 UNF
INSIDE DIAMETER LENGTH
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/11-F7?
M5501/11-F7 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace M5501/11-F7?
There are 30 known substitutes for M5501/11-F7: 08MT-0107, 930-083-0001, 6210-03-01 and 27 more. Substitute compatibility should be verified for your specific system.
Is M5501/11-F7 still available?
M5501/11-F7 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.