Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.990 INCHES MAXIMUM IN, length: 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL, hole_diameter: 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, overall_height: 1.140 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-186-9607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NAS1464B089-12C
NSN:5340-01-186-9607 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
width
0.990 INCHES MAXIMUM IN
length
1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN
material
COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL
hole_diameter
0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
overall_height
1.140 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.032 INCHES NOMINAL IN
loop/holding_dimension
0.865 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
specification/standard_data
80205-80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
distance_from_loop_center_to_end
0.5525 INCHES MINIMUM IN
material_document_and_classification
QQ-C-533,ALLOY 172 FED SPEC 1ST MATERIAL RESPONSE OR QQ-C-533,ALLOY 170,TEMPER A FED SPEC 2ND MATERIAL RESPONSE OVERALL
NSN
5340-01-186-9607
COMPONENT DIAGRAM
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.5525 INCHES MINIMUM IN
•
MATERIAL: COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL
•
SPECIFICATION/STANDARD DATA: 80205-80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC 1ST MATERIAL RESPONSE OR QQ-C-533,ALLOY 170,TEMPER A FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
LENGTH: 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.865 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO END
0.5525 INCHES MINIMUM IN
MATERIAL
COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL
SPECIFICATION/STANDARD DATA
80205-80205-NAS1464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533,ALLOY 172 FED SPEC 1ST MATERIAL RESPONSE OR QQ-C-533,ALLOY 170,TEMPER A FED SPEC 2ND MATERIAL RESPONSE OVERALL
LENGTH
1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1464B089-12C?
NAS1464B089-12C is a CLIP,SPRING TENSION.
What parts can replace NAS1464B089-12C?
There are 10 known substitutes for NAS1464B089-12C: NAS1463, NAS1464, NAS1464B056-08T and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1464B089-12C?
NAS1464B089-12C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-186-9607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.