PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1397P2N
NAS1397P2N ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.172 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-985-0280, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1397P2N
NSN: 5340-00-985-0280
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter0.172 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
specification/standard_data80205-NAS1397+2N PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationMIL-P-17091,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.540 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.360 INCHES NOMINAL IN
NSN5340-00-985-0280
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1397P2N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.540 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-17091,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS1397+2N PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.360 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.540 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-17091,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
SPECIFICATION/STANDARD DATA80205-NAS1397+2N PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYAMIDE NYLON BAND
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.360 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.172 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
8955Upgraded Successor
successor cross-reference
successor
NAS1397P2EBUpgraded Successor
successor cross-reference
successor
094430-0000Upgraded Successor
successor cross-reference
successor
A05763Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1397P2N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1397P2N?
NAS1397P2N is a CLAMP,LOOP.
What parts can replace NAS1397P2N?
There are 4 known substitutes for NAS1397P2N: 8955, NAS1397P2EB, 094430-0000 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1397P2N?
NAS1397P2N is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-985-0280. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1397P2N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026