PartsTable
Technical Data Sheet
Download PDF

N155-5330-2-11 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N155-5330-2-11: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 2.000 INCHES NOMINAL IN, center_hole_diameter: 1.250 INCHES NOMINAL IN, cross-sectional_height: 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN, cross-sectional_shape_style: V WITH FILLER RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-223-2756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N155-5330-2-11
NSN: 5330-00-223-2756
FSC: 5330 — Packing and Gasket Materials
CAGE: 82146 — NAVAL SUPPLY SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter2.000 INCHES NOMINAL IN
center_hole_diameter1.250 INCHES NOMINAL IN
cross-sectional_height0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
cross-sectional_shape_styleV WITH FILLER RING
NSN5330-00-223-2756
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N155-5330-2-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: V WITH FILLER RING
•
PERIPHERAL DIAMETER: 2.000 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEV WITH FILLER RING
PERIPHERAL DIAMETER2.000 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
MILP19152Reference document
Same NSN cross-reference
Reference document — Identification reference
01042Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy N155-5330-2-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N155-5330-2-11?
N155-5330-2-11 is a PACKING,PREFORMED.
What parts can replace N155-5330-2-11?
There are 2 known substitutes for N155-5330-2-11: MILP19152, 01042. Substitute compatibility should be verified for your specific system.
What is the NSN for N155-5330-2-11?
N155-5330-2-11 is cataloged in the U.S. Government catalog under NSN 5330-00-223-2756. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N155-5330-2-11