PartsTable
Technical Data Sheet
Download PDF

01042 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

01042: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 2.000 INCHES NOMINAL IN, center_hole_diameter: 1.250 INCHES NOMINAL IN, cross-sectional_height: 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN, cross-sectional_shape_style: V WITH FILLER RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-223-2756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01042
NSN: 5330-00-223-2756
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter2.000 INCHES NOMINAL IN
center_hole_diameter1.250 INCHES NOMINAL IN
cross-sectional_height0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
cross-sectional_shape_styleV WITH FILLER RING
NSN5330-00-223-2756
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01042 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: V WITH FILLER RING
•
PERIPHERAL DIAMETER: 2.000 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEV WITH FILLER RING
PERIPHERAL DIAMETER2.000 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
MILP19152Reference document
Same NSN cross-reference
Reference document — Identification reference
N155-5330-2-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 01042?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01042?
01042 is a PACKING,PREFORMED.
What parts can replace 01042?
There are 2 known substitutes for 01042: MILP19152, N155-5330-2-11. Substitute compatibility should be verified for your specific system.
What is the NSN for 01042?
01042 is cataloged in the U.S. Government catalog under NSN 5330-00-223-2756. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01042