PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N0.10-24UNC-2A,5/8"LG CRES 316

N0.10-24UNC-2A,5/8"LG CRES 316 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.511 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, fastener_length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5305-01-083-1591, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N0.10-24UNC-2A,5/8"LG CRES 316
NSN: 5305-01-083-1591
FSC: 5305
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_stylePAN
head_height0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length0.511 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
fastener_length0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentOXIDE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch24
NSN5305-01-083-1591
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: N0.10-24UNC-2A,5/8"LG CRES 316 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 24
•
SCREW SURFACE TREATMENT: OXIDE
•
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
•
THREAD LENGTH: 0.511 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
THREAD QUANTITY PER INCH24
SCREW SURFACE TREATMENTOXIDE
SCREW MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
NOMINAL THREAD DIAMETER0.190 INCHES IN
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 9C STYLE
THREAD LENGTH0.511 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
M76-102410InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AN520C10-14InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
421635InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5305PL0838827InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
NO.10-24UNC-2A, 5/8"LG CRES 316InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
FF-S-92InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N0.10-24UNC-2A,5/8"LG CRES 316?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N0.10-24UNC-2A,5/8"LG CRES 316?
N0.10-24UNC-2A,5/8"LG CRES 316 is a SCREW,MACHINE.
What parts can replace N0.10-24UNC-2A,5/8"LG CRES 316?
There are 8 known substitutes for N0.10-24UNC-2A,5/8"LG CRES 316: M76-102410, AN520C10-14, 421635 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N0.10-24UNC-2A,5/8"LG CRES 316?
N0.10-24UNC-2A,5/8"LG CRES 316 is cataloged in the Federal Logistics Information System under NSN 5305-01-083-1591. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N0.10-24UNC-2A,5/8"LG CRES 316

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026