PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS9352-31
MS9352-31 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, material_thickness: 0.064 INCHES NOMINAL IN, loop_inside_diameter: 2.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-0541, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9352-31
NSN: 5340-00-005-0541
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
material_thickness0.064 INCHES NOMINAL IN
loop_inside_diameter2.125 INCHES NOMINAL IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.500 INCHES NOMINAL IN
NSN5340-00-005-0541
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9352-31 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
LOOP INSIDE DIAMETER: 2.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATOROFFSET MOUNT
LOOP INSIDE DIAMETER2.125 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
NAS1715CT32SWHUpgraded Successor
successor cross-reference
successor
NAS1715Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9352-31?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9352-31?
MS9352-31 is a CLAMP,LOOP.
What parts can replace MS9352-31?
There are 2 known substitutes for MS9352-31: NAS1715CT32SWH, NAS1715. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9352-31?
MS9352-31 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-0541. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9352-31

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026