MS9349-05 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS9349-05: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, material_thickness: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN, loop_inside_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-078-3619, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9349-05

NSN: 5340-00-078-3619
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
material_thickness	0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter	0.375 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.773 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
NSN	5340-00-078-3619

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.773 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN

•

MATERIAL: STEEL COMP 321 BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.773 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
LOOP INSIDE DIAMETER	0.375 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

8016-S-6Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AS9349-MS9349-05Reference document

Same NSN cross-reference

Reference document — Secondary reference

JM43LC3SS6TReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

SAE-AS9349Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MS9349-05?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9349-05?

MS9349-05 is a CLAMP,LOOP.

What parts can replace MS9349-05?

There are 4 known substitutes for MS9349-05: 8016-S-6, AS9349-MS9349-05, JM43LC3SS6T and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9349-05?

MS9349-05 is cataloged in the U.S. Government catalog under NSN 5340-00-078-3619. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9349-05 — CLAMP,LOOP

Request a Quote — MS9349-05