8016-S-6 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

8016-S-6: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-078-3619, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

8016-S-6

NSN: 5340-00-078-3619
NIINs: 000783619, 008449170, 012207620
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL COMP 321 BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.375 INCHES NOMINAL IN
cushioning_environmental_protection	FUEL, AROMATIC
material_document_and_classification	AISI ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.592 INCHES NOMINAL IN
NSN	5340-00-078-3619

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.773 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN

•

MATERIAL: STEEL COMP 321 BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.773 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
LOOP INSIDE DIAMETER	0.375 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

AS9349-MS9349-05Reference document

Same NSN cross-reference

Reference document — Secondary reference

JM43LC3SS6TReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

SAE-AS9349Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS9349-05Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 8016-S-6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 8016-S-6?

8016-S-6 is a CLAMP,LOOP.

What parts can replace 8016-S-6?

There are 4 known substitutes for 8016-S-6: AS9349-MS9349-05, JM43LC3SS6T, SAE-AS9349 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 8016-S-6?

8016-S-6 is cataloged in the U.S. Government catalog under NSN 5340-00-078-3619. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

8016-S-6 — CLAMP,LOOP

Request a Quote — 8016-S-6