MS9068-334 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS9068-334: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.990 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN, center_hole_diameter: 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-138-5522, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS9068-334

NSN: 5331-01-138-5522
FSC: 5331 — O-ring
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	2.990 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN
center_hole_diameter	2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN	5331-01-138-5522

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 2.990 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
OUTSIDE DIAMETER	2.990 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 6

74553F01Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AS3582-334Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

S0604 2-334Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-334 S604-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-334S604-7Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MS9068-334?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS9068-334?

MS9068-334 is a O-RING.

What parts can replace MS9068-334?

There are 6 known substitutes for MS9068-334: 74553F01, AS3582-334, S0604 2-334 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS9068-334?

MS9068-334 is cataloged in the U.S. Government catalog under NSN 5331-01-138-5522. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS9068-334 — O-RING

Request a Quote — MS9068-334