PartsTable
Technical Data Sheet
Download PDF

2-334 S604-70 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-334 S604-70: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include end_item_identification: DIESEL ENGINE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-138-5522, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-334 S604-70
NSN: 5331-01-138-5522
NIINs: 011385522, 014110035
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
end_item_identificationDIESEL ENGINE
NSN5331-01-138-5522
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-334 S604-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.990 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.990 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
SUBSTITUTES & CROSS-REFERENCES 6
74553F01Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AS3582-334Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS9068-334Reference document
Same NSN cross-reference
Reference document — Secondary reference
S0604 2-334Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS3582Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2-334S604-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 2-334 S604-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-334 S604-70?
2-334 S604-70 is a O-RING.
What parts can replace 2-334 S604-70?
There are 6 known substitutes for 2-334 S604-70: 74553F01, AS3582-334, MS9068-334 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-334 S604-70?
2-334 S604-70 is cataloged in the U.S. Government catalog under NSN 5331-01-138-5522. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-334 S604-70

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.