PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS9024-28
MS9024-28 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 4130 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BANDUNABLE TO DECODE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-4002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS9024-28
NSN: 5340-00-200-4002
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 4130 BAND
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BANDUNABLE TO DECODE
material_thickness0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
loop_inside_diameter2.125 INCHES NOMINAL IN
material_document_and_classificationAMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
NSN5340-00-200-4002
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS9024-28 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6350 TO 6355 ASSN STD ALL MATERIAL RESPONSES BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.717 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.499 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6350 TO 6355 ASSN STD ALL MATERIAL RESPONSES BAND
STYLE DESIGNATOROFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END1.717 INCHES NOMINAL IN
LOOP INSIDE DIAMETER2.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6350 TO 6355 ASSN STD ALL MATERIAL RESPONSES BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.499 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
SURFACE TREATMENTCADMIUM BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
MS9024Interchangeable
interchangeable cross-reference
interchangeable
MS9024-28Interchangeable
interchangeable cross-reference
interchangeable
5342PL0913686Interchangeable
interchangeable cross-reference
interchangeable
6739842-34Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS9024-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9024-28?
MS9024-28 is a CLAMP,LOOP.
What parts can replace MS9024-28?
There are 4 known substitutes for MS9024-28: MS9024, MS9024-28, 5342PL0913686 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9024-28?
MS9024-28 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-4002. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS9024-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026