PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5342PL0913686
5342PL0913686 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 4130 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-7299, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5342PL0913686
NSN: 5340-00-664-7299
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 4130 BAND
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
loop_inside_diameter2.125 INCHES NOMINAL IN
material_document_and_classificationAMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
NSN5340-00-664-7299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5342PL0913686 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: STEEL COMP 4130 BAND
•
SURFACE TREATMENT: CADMIUM BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIALSTEEL COMP 4130 BAND
SURFACE TREATMENTCADMIUM BAND
MATERIALRUBBER SYNTHETIC CUSHION
DISTANCE FROM LOOP CENTER TO TONGUE END1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
MATERIAL THICKNESS0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER2.125 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BANDUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
6739842-34Interchangeable
interchangeable cross-reference
interchangeable
MS9024-28Interchangeable
interchangeable cross-reference
interchangeable
MS9024-04Interchangeable
interchangeable cross-reference
interchangeable
NAS1715C5NInterchangeable
interchangeable cross-reference
interchangeable
MS9024Interchangeable
interchangeable cross-reference
interchangeable
5342PL0965816Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5342PL0913686?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5342PL0913686?
5342PL0913686 is a CLAMP,LOOP.
What parts can replace 5342PL0913686?
There are 18 known substitutes for 5342PL0913686: 6739842-34, MS9024-28, MS9024-04 and 15 more. Substitute compatibility should be verified for your specific system.
Is 5342PL0913686 still available?
5342PL0913686 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5342PL0913686

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026