The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.279 INCHES NOMINAL IN, center_hole_diameter: 1.041 INCHES MINIMUM AND 1.053 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-463-7794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS9024-14
NSN:5340-00-463-7794 NIINs:004637794, 010289351 FSC:5340 — Hardware, Commercial CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating
65.0 SHORE DUROMETER A NOMINAL
outside_diameter
1.279 INCHES NOMINAL IN
center_hole_diameter
1.041 INCHES MINIMUM AND 1.053 INCHES MAXIMUM IN
elongation_percentage
200 MAXIMUM
cross-sectional_height
0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN
5340-00-463-7794
COMPONENT DIAGRAM
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.152 INCHES MINIMUM AND 1.162 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.152 INCHES MINIMUM AND 1.162 INCHES MAXIMUM IN
SURFACE TREATMENT
CADMIUM BAND
TONGUE HOLE TYPE
ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS9024-14?
MS9024-14 is a CLAMP,LOOP.
What parts can replace MS9024-14?
There are 3 known substitutes for MS9024-14: NAS1715, 5340004637794, 5342PL0913652. Substitute compatibility should be verified for your specific system.
What is the NSN for MS9024-14?
MS9024-14 is cataloged in the U.S. Government catalog under NSN 5340-00-463-7794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.