PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS52471/5-4
MS52471/5-4 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The MS52471/5-4 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-017-5127, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS52471/5-4
NSN: 4720-01-017-5127
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMS52471/5-4
NSN4720-01-017-5127
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MS52471/5-4 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
BURST TEST PRESSURE: 16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
NONDEFINITIVE SPEC/STD DATA: 100DR2 TYPE
•
INSIDE SURFACE CONDITION: SMOOTH
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND OZONE RESISTANT
•
HYDROSTATIC TEST PRESSURE: 8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
•
OPERATING PRESSURE: 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
BURST TEST PRESSURE16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
NONDEFINITIVE SPEC/STD DATA100DR2 TYPE
INSIDE SURFACE CONDITIONSMOOTH
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND OZONE RESISTANT
HYDROSTATIC TEST PRESSURE8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
OPERATING PRESSURE4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
END ITEM IDENTIFICATIONTRUCK,FORKLIFT,DIESEL ENGINE DRIVEN,6000 LB.;ANTHONY MODEL MLT 6-2,NSN 3930003271575 LBS
OUTSIDE DIAMETER0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
H106Interchangeable
interchangeable cross-reference
interchangeable
1509/FC163-6Interchangeable
interchangeable cross-reference
interchangeable
H25-3-8Interchangeable
interchangeable cross-reference
interchangeable
1509-4Interchangeable
interchangeable cross-reference
interchangeable
KT-3186-4 ITEMInterchangeable
interchangeable cross-reference
interchangeable
M24135/2-04Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS52471/5-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS52471/5-4?
MS52471/5-4 is a MS52471/5-4.
What parts can replace MS52471/5-4?
There are 25 known substitutes for MS52471/5-4: H106, 1509/FC163-6, H25-3-8 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS52471/5-4?
MS52471/5-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-017-5127. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS52471/5-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026