PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24135/2-04
M24135/2-04 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M24135/2-04 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-289-5222, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24135/2-04
NSN: 4720-00-289-5222
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM24135/2-04
NSN4720-00-289-5222
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M24135/2-04 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATING PRESSURE: 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OUTSIDE DIAMETER: 0.690 INCHES NOMINAL IN
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
HYDROSTATIC TEST PRESSURE: 10000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
OPERATING PRESSURE5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
OUTSIDE DIAMETER0.690 INCHES NOMINAL IN
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
INSIDE DIAMETER0.250 INCHES NOMINAL IN
HYDROSTATIC TEST PRESSURE10000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
END ITEM IDENTIFICATIONGRUMMAN A10 AIRCRAFT; LOGISTICS SUPPORT VESSEL (LSV)
SPECIAL FEATURESLAY LINE WHICH ASSURES NO HOSE TWIST DURING INSTALLATION
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
1509-6Interchangeable
interchangeable cross-reference
interchangeable
M24135/1-06Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-24135-6CLInterchangeable
interchangeable cross-reference
interchangeable
FC163-10Interchangeable
interchangeable cross-reference
interchangeable
FC163-1509-10Interchangeable
interchangeable cross-reference
interchangeable
KT-3070-3 ITEMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24135/2-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24135/2-04?
M24135/2-04 is a M24135/2-04.
What parts can replace M24135/2-04?
There are 27 known substitutes for M24135/2-04: 1509-6, M24135/1-06, MIL-H-24135-6CL and 24 more. Substitute compatibility should be verified for your specific system.
Is M24135/2-04 still available?
M24135/2-04 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24135/2-04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026