PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51932-104
MS51932-104 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, surface_treatment: CADMIUM OR ZINC OVERALL, pin_overall_length: 2.000 INCHES NOMINAL IN, first_hole_diameter: 0.140 INCHES NOMINAL IN, pin_overall_diameter: 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-058-3553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51932-104
NSN: 5315-00-058-3553
FSC: 5315
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
surface_treatmentCADMIUM OR ZINC OVERALL
pin_overall_length2.000 INCHES NOMINAL IN
first_hole_diameter0.140 INCHES NOMINAL IN
pin_overall_diameter0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
second_hole_diameter0.140 INCHES NOMINAL IN
first_end_taper_angle15.0 DEGREES NOMINAL
first_end_taper_length0.109 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes1.570 INCHES NOMINAL IN
NSN5315-00-058-3553
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS51932-104 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST HOLE DIAMETER: 0.140 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 2.000 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.109 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 1.570 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST HOLE DIAMETER0.140 INCHES NOMINAL IN
PIN OVERALL LENGTH2.000 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.109 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
CENTER TO CENTER DISTANCE BETWEEN HOLES1.570 INCHES NOMINAL IN
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
132310Interchangeable
interchangeable cross-reference
interchangeable
583553Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51932-104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51932-104?
MS51932-104 is a PIN,STRAIGHT,HEADLESS.
What parts can replace MS51932-104?
There are 2 known substitutes for MS51932-104: 132310, 583553. Substitute compatibility should be verified for your specific system.
What is the NSN for MS51932-104?
MS51932-104 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-058-3553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51932-104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026