PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 583553
583553 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BELLOWS,SENSING SET is a the manufacturer industrial component. Key specifications include end_item_identification: FUEL CONTROL,P/N 573400,ENGINE,ACFT,J60, general_characteristics_item_description: CRES,2.640 IN. O/A LG IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-058-3553, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
583553
NSN: 5315-00-058-3553
FSC: 5315
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
end_item_identificationFUEL CONTROL,P/N 573400,ENGINE,ACFT,J60
general_characteristics_item_descriptionCRES,2.640 IN. O/A LG IN
NSN5315-00-058-3553
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 583553 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST HOLE DIAMETER: 0.140 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 2.000 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.109 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 1.570 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST HOLE DIAMETER0.140 INCHES NOMINAL IN
PIN OVERALL LENGTH2.000 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.109 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
CENTER TO CENTER DISTANCE BETWEEN HOLES1.570 INCHES NOMINAL IN
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
132310Interchangeable
interchangeable cross-reference
interchangeable
583553Interchangeable
interchangeable cross-reference
interchangeable
MS51932-104Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 583553?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 583553?
583553 is a BELLOWS,SENSING SET.
What parts can replace 583553?
There are 3 known substitutes for 583553: 132310, 583553, MS51932-104. Substitute compatibility should be verified for your specific system.
What is the NSN for 583553?
583553 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-058-3553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 583553

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026