PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS51861-49
MS51861-49 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, head_diameter: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, fastener_length: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN, features_provided: CASEHARDENED, surface_treatment: ZINC AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-432-4205, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51861-49
NSN: 5305-00-432-4205
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OVERALL
head_stylePAN
head_height0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
head_diameter0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
fastener_length0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
features_providedCASEHARDENED
surface_treatmentZINC AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_dataAB TYPE
departure_from_cited_documentAS DIFFERENTIATED BY SURFACE
nonmachine_nominal_thread_diameter0.190 INCHES IN
NSN5305-00-432-4205
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS51861-49 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: PAN
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: AB TYPE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEPAN
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NONDEFINITIVE SPEC/STD DATAAB TYPE
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
NASM51861Interchangeable
interchangeable cross-reference
interchangeable
80105Interchangeable
interchangeable cross-reference
interchangeable
MS24617-55Interchangeable
interchangeable cross-reference
interchangeable
92662Interchangeable
interchangeable cross-reference
interchangeable
92733Interchangeable
interchangeable cross-reference
interchangeable
FF-S-107 TYABInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS51861-49?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51861-49?
MS51861-49 is a SCREW,TAPPING.
What parts can replace MS51861-49?
There are 28 known substitutes for MS51861-49: NASM51861, 80105, MS24617-55 and 25 more. Substitute compatibility should be verified for your specific system.
Is MS51861-49 still available?
MS51861-49 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51861-49

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026