PartsTable
Technical Data Sheet
Download PDF

MS24617-55 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS24617-55: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN, head_height: 0.156 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN, head_diameter: 0.457 INCHES MINIMUM AND 0.476 INCHES MAXIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN, special_features: THREADS PER INCH 10. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-052-8241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24617-55
NSN: 5305-00-052-8241
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN
head_height0.156 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
head_diameter0.457 INCHES MINIMUM AND 0.476 INCHES MAXIMUM IN
fastener_length0.750 INCHES NOMINAL IN
special_featuresTHREADS PER INCH 10
features_providedCASEHARDENED
surface_treatmentZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.242 INCHES IN
surface_treatment_document_and_classificationASTM B633 ASSN STD ALL TREATMENT RESPONSES OVERALL
NSN5305-00-052-8241
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24617-55 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES IN
•
HEAD HEIGHT: 0.156 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 ASSN STD ALL TREATMENT RESPONSES OVERALL
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: PAN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.242 INCHES IN
HEAD HEIGHT0.156 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 ASSN STD ALL TREATMENT RESPONSES OVERALL
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEPAN
SPECIAL FEATURESTHREADS PER INCH 10
SURFACE TREATMENTZINC OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 6
NASM51861Reference document
Same NSN cross-reference
Reference document — Secondary reference
80105Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FF-S-107Reference document
Same NSN cross-reference
Reference document — Secondary reference
ANSI B18.6.4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
FF-S-107 TYABReference document
Same NSN cross-reference
Reference document — Secondary reference
MS51861-67-3/4IN.X1/4IN.Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS24617-55?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24617-55?
MS24617-55 is a SCREW,TAPPING.
What parts can replace MS24617-55?
There are 6 known substitutes for MS24617-55: NASM51861, 80105, FF-S-107 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24617-55?
MS24617-55 is cataloged in the U.S. Government catalog under NSN 5305-00-052-8241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24617-55