PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS39263-20
MS39263-20 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 1.235 INCHES MINIMUM AND 1.297 INCHES MAXIMUM IN, outside_diameter: 1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN, operating_pressure: 1625.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 6500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-017-5128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS39263-20
NSN: 4720-01-017-5128
FSC: 4720
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter1.235 INCHES MINIMUM AND 1.297 INCHES MAXIMUM IN
outside_diameter1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
operating_pressure1625.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure6500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure3250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data100R2 TYPE
layer_composition_and_location1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
outer_covering_environmental_protectionOIL RESISTANT AND OZONE RESISTANT
NSN4720-01-017-5128
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MS39263-20 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
INSIDE SURFACE CONDITION: SMOOTH
•
HYDROSTATIC TEST PRESSURE: 3250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
NONDEFINITIVE SPEC/STD DATA: 100R2 TYPE
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND OZONE RESISTANT
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
INSIDE SURFACE CONDITIONSMOOTH
HYDROSTATIC TEST PRESSURE3250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
NONDEFINITIVE SPEC/STD DATA100R2 TYPE
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND OZONE RESISTANT
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
OPERATING PRESSURE1625.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
CROSS-SECTIONAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
H106Interchangeable
interchangeable cross-reference
interchangeable
1509/FC163-6Interchangeable
interchangeable cross-reference
interchangeable
H25-3-8Interchangeable
interchangeable cross-reference
interchangeable
5871941Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-24135,CLAInterchangeable
interchangeable cross-reference
interchangeable
MS52471/5-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS39263-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS39263-20?
MS39263-20 is a HOSE,NONMETALLIC.
What parts can replace MS39263-20?
There are 21 known substitutes for MS39263-20: H106, 1509/FC163-6, H25-3-8 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS39263-20?
MS39263-20 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-017-5128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS39263-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026