PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35810-9
MS35810-9 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, diameter: 0.866 INCHES MINIMUM AND 0.871 INCHES MAXIMUM IN, head_style: FLAT CHAMFER, chamfer_length: 0.071 INCHES NOMINAL IN, style_designator: STRAIGHT, under_head_length: 2.156 INCHES MINIMUM AND 2.176 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-069-0598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35810-9
NSN: 5315-01-069-0598
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
height0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
diameter0.866 INCHES MINIMUM AND 0.871 INCHES MAXIMUM IN
head_styleFLAT CHAMFER
chamfer_length0.071 INCHES NOMINAL IN
style_designatorSTRAIGHT
under_head_length2.156 INCHES MINIMUM AND 2.176 INCHES MAXIMUM IN
first_hole_diameter0.167 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
nondefinitive_spec/std_data1 TYPE
distance_from_centerline_of_hole_to_end_of_pin0.167 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
NSN5315-01-069-0598
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35810-9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
FIRST HOLE DIAMETER: 0.167 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT CHAMFER
•
CHAMFER LENGTH: 0.071 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 0.866 INCHES MINIMUM AND 0.871 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.167 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
FIRST HOLE DIAMETER0.167 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
CHAMFER LENGTH0.071 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
DIAMETER0.866 INCHES MINIMUM AND 0.871 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.167 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE
UNDER HEAD LENGTH2.156 INCHES MINIMUM AND 2.176 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
817277Interchangeable
interchangeable cross-reference
interchangeable
114783Interchangeable
interchangeable cross-reference
interchangeable
MS35810-32Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-27235Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35810-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35810-9?
MS35810-9 is a PIN,STRAIGHT,HEADED.
What parts can replace MS35810-9?
There are 4 known substitutes for MS35810-9: 817277, 114783, MS35810-32 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35810-9?
MS35810-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-069-0598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35810-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026