PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-27235
MIL-P-27235 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, diameter: 0.866 INCHES MINIMUM AND 0.871 INCHES MAXIMUM IN, head_style: FLAT CHAMFER, chamfer_length: 0.071 INCHES NOMINAL IN, style_designator: STRAIGHT, under_head_length: 2.156 INCHES MINIMUM AND 2.176 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-845-4232, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-27235
NSN: 5315-00-845-4232
FSC: 5315
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
height0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
diameter0.866 INCHES MINIMUM AND 0.871 INCHES MAXIMUM IN
head_styleFLAT CHAMFER
chamfer_length0.071 INCHES NOMINAL IN
style_designatorSTRAIGHT
under_head_length2.156 INCHES MINIMUM AND 2.176 INCHES MAXIMUM IN
first_hole_diameter0.167 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
nondefinitive_spec/std_data1 TYPE
distance_from_centerline_of_hole_to_end_of_pin0.167 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
NSN5315-00-845-4232
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MIL-P-27235 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT
•
DIAMETER: 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
•
PIN HEAD DIAMETER: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
•
HEIGHT: 0.094 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT
DIAMETER0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
MATERIALSTEEL OVERALL
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
HEIGHT0.094 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE OVERALL
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.078 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
0033068Interchangeable
interchangeable cross-reference
interchangeable
P2766Interchangeable
interchangeable cross-reference
interchangeable
114783Interchangeable
interchangeable cross-reference
interchangeable
A10902Interchangeable
interchangeable cross-reference
interchangeable
2A13675-1Interchangeable
interchangeable cross-reference
interchangeable
SM-C-806471-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-27235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-27235?
MIL-P-27235 is a PIN,STRAIGHT,HEADED.
What parts can replace MIL-P-27235?
There are 15 known substitutes for MIL-P-27235: 0033068, P2766, 114783 and 12 more. Substitute compatibility should be verified for your specific system.
Is MIL-P-27235 still available?
MIL-P-27235 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-27235

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026