PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35810-14
MS35810-14 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, diameter: 0.368 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, material: STEEL COMP 1010 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.078 INCHES NOMINAL IN, shear_strength: 41000 DOUBLE POUNDS PER SQUARE INCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-210-2034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35810-14
NSN: 5315-01-210-2034
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
height0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
diameter0.368 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
materialSTEEL COMP 1010 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.078 INCHES NOMINAL IN
shear_strength41000 DOUBLE POUNDS PER SQUARE INCH
hardness_rating70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
pin_head_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
under_head_length0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
NSN5315-01-210-2034
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35810-14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT CHAMFER
•
PIN CHAMFER ANGLE: 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
•
STYLE DESIGNATOR: STRAIGHT
•
HEIGHT: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1010 OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT CHAMFER
PIN CHAMFER ANGLE40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
STYLE DESIGNATORSTRAIGHT
HEIGHT0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
HARDNESS RATING70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1010 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.124 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
E25Interchangeable
interchangeable cross-reference
interchangeable
EMM307Interchangeable
interchangeable cross-reference
interchangeable
F25-1Interchangeable
interchangeable cross-reference
interchangeable
A202-7Interchangeable
interchangeable cross-reference
interchangeable
352824-1Interchangeable
interchangeable cross-reference
interchangeable
F-251 ITEM 9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35810-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35810-14?
MS35810-14 is a PIN,STRAIGHT,HEADED.
What parts can replace MS35810-14?
There are 6 known substitutes for MS35810-14: E25, EMM307, F25-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35810-14?
MS35810-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-210-2034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35810-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026