PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A202-7
A202-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,GLASS DIELECTRIC. Key specifications include diameter: 0.251 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN, material: STEEL COMP 4140 OVERALL, unit_type: ELECTRONIC, knurl_length: 0.250 INCHES NOMINAL IN, terminal_type: SOLDER LUG/STUD, alignment_type: RIGID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A202-7
NSN: 3110-00-156-1769
FSC: 3110
CAGE: 70801 — AUTOMOTIVE THRUST BEARING CORP (USA)
SPECIFICATIONS
diameter0.251 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
materialSTEEL COMP 4140 OVERALL
unit_typeELECTRONIC
knurl_length0.250 INCHES NOMINAL IN
terminal_typeSOLDER LUG/STUD
alignment_typeRIGID
overall_height0.8750 INCHES NOMINAL IN
overall_length0.937 INCHES NOMINAL IN
surface_finishGROUND
first_end_styleSQUARE
overall_diameter0.430 INCHES MAXIMUM IN
style_designatorSTRAIGHT KNURLED
NSN3110-00-156-1769
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A202-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.3125 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
BORE SMALLEST DIAMETER: 2.1250 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.3125 INCHES NOMINAL IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL HEIGHT0.8750 INCHES NOMINAL IN
STYLE DESIGNATORGROOVED RACE SURFACE
BORE SMALLEST DIAMETER2.1250 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
4427Interchangeable
interchangeable cross-reference
interchangeable
AN280-406Interchangeable
interchangeable cross-reference
interchangeable
P113Interchangeable
interchangeable cross-reference
interchangeable
AN6H7AInterchangeable
interchangeable cross-reference
interchangeable
BS4-1903PC12Interchangeable
interchangeable cross-reference
interchangeable
BS4-1897PC12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A202-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A202-7?
A202-7 is a CAPACITOR,FIXED,GLASS DIELECTRIC.
What parts can replace A202-7?
There are 26 known substitutes for A202-7: 4427, AN280-406, P113 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A202-7?
A202-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A202-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026