PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35647-2
MS35647-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PADLOCK is a the manufacturer industrial component. Key specifications include overall_width: 1.125 INCHES NOMINAL IN, overall_height: 1.063 INCHES NOMINAL IN, shackle_diameter: 0.177 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, shackle_clearance: 0.625 INCHES NOMINAL IN, key_change_quantity: 3000, operating_mechanism_type: PIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-2742, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35647-2
NSN: 5340-00-582-2742
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
overall_width1.125 INCHES NOMINAL IN
overall_height1.063 INCHES NOMINAL IN
shackle_diameter0.177 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
shackle_clearance0.625 INCHES NOMINAL IN
key_change_quantity3000
operating_mechanism_typePIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
NSN5340-00-582-2742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS35647-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATING MECHANISM TYPE: PIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
•
SHACKLE CLEARANCE: 0.625 INCHES NOMINAL IN
•
SHACKLE DIAMETER: 0.177 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
KEY CHANGE QUANTITY: 3000
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.125 INCHES NOMINAL IN
OPERATING MECHANISM TYPEPIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
OVERALL HEIGHT1.063 INCHES NOMINAL IN
SHACKLE CLEARANCE0.625 INCHES NOMINAL IN
SHACKLE DIAMETER0.177 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
KEY CHANGE QUANTITY3000
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
FFP101TYPEEPBUpgraded Successor
successor cross-reference
successor
MS35647-8Upgraded Successor
successor cross-reference
successor
MS35647-7Upgraded Successor
successor cross-reference
successor
MILP17802STYLEACLASS1Upgraded Successor
successor cross-reference
successor
21B772Interchangeable
interchangeable cross-reference
interchangeable
FF-P-101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35647-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35647-2?
MS35647-2 is a PADLOCK.
What parts can replace MS35647-2?
There are 8 known substitutes for MS35647-2: FFP101TYPEEPB, MS35647-8, MS35647-7 and 5 more. Substitute compatibility should be verified for your specific system.
Is MS35647-2 still available?
MS35647-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35647-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026