PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFP101TYPEEPB
FFP101TYPEEPB ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PADLOCK is a the manufacturer industrial component. Key specifications include chain_length: 9.000 INCHES NOMINAL IN, construction: LAMINATED OR SOLID, overall_width: 2.000 INCHES NOMINAL IN, overall_height: 2.875 INCHES NOMINAL IN, shackle_diameter: 0.344 INCHES NOMINAL IN, shackle_clearance: 0.812 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-2740, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFP101TYPEEPB
NSN: 5340-00-582-2740
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
chain_length9.000 INCHES NOMINAL IN
constructionLAMINATED OR SOLID
overall_width2.000 INCHES NOMINAL IN
overall_height2.875 INCHES NOMINAL IN
shackle_diameter0.344 INCHES NOMINAL IN
shackle_clearance0.812 INCHES NOMINAL IN
key_change_quantity1800
operating_mechanism_typePIN TUMBLER
nondefinitive_spec/std_dataEPB TYPE
NSN5340-00-582-2740
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFP101TYPEEPB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHANGE QUANTITY: 10000
•
SHACKLE CLEARANCE: 0.813 INCHES NOMINAL IN
•
SHACKLE DIAMETER: 0.302 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
OPERATING MECHANISM TYPE: PIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.750 INCHES NOMINAL IN
KEY CHANGE QUANTITY10000
SHACKLE CLEARANCE0.813 INCHES NOMINAL IN
OVERALL HEIGHT1.438 INCHES NOMINAL IN
SHACKLE DIAMETER0.302 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
OPERATING MECHANISM TYPEPIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FFP101TYPEEPBUpgraded Successor
successor cross-reference
successor
MS35647Upgraded Successor
successor cross-reference
successor
MS35647-2Upgraded Successor
successor cross-reference
successor
MS35647-7Interchangeable
interchangeable cross-reference
interchangeable
MILP17802STYLEACLASS1Interchangeable
interchangeable cross-reference
interchangeable
MS35647-8Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFP101TYPEEPB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFP101TYPEEPB?
FFP101TYPEEPB is a PADLOCK.
What parts can replace FFP101TYPEEPB?
There are 6 known substitutes for FFP101TYPEEPB: FFP101TYPEEPB, MS35647, MS35647-2 and 3 more. Substitute compatibility should be verified for your specific system.
Is FFP101TYPEEPB still available?
FFP101TYPEEPB is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFP101TYPEEPB

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026