PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35495-592

MS35495-592 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: ROUND, head_height: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN, head_diameter: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-056-7879, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35495-592
NSN: 5305-00-056-7879
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleROUND
head_height0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
head_diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 1C STYLE
nonmachine_nominal_thread_diameter0.190 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TY2,CL3, FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY2,CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5305-00-056-7879
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35495-592 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
HEAD STYLE: ROUND
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL3, FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY2,CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1C STYLE
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
HEAD STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2,CL3, FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY2,CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1C STYLE
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
FFS111STYLE1SInterchangeable
Same NIIN cross-reference
interchangeable
AN545-10R4Interchangeable
Same NIIN cross-reference
interchangeable
FFS111Interchangeable
Same NIIN cross-reference
interchangeable
MS35493-74Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35495-592?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35495-592?
MS35495-592 is a SCREW,WOOD.
What parts can replace MS35495-592?
There are 4 known substitutes for MS35495-592: FFS111STYLE1S, AN545-10R4, FFS111 and 1 more. Substitute compatibility should be verified for your specific system.
Is MS35495-592 still available?
MS35495-592 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35495-592

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026