PartsTable
Technical Data Sheet
Download PDF

FFS111STYLE1S — SCREW,WOOD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS111STYLE1S: SCREW,WOOD.

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, head_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, fastener_length: 2.000 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CADMIUM AND DICHROMATE OR DICHROMATE OR ZINC AND ZINC AND DICHROMATE OVERALLDICHROMATE OVERALL, internal_drive_style: SLOT. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-010-1964, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS111STYLE1S
NSN: 5305-00-010-1964
NIINs: 000101964, 000101995, 000102008, 000102023, 000102161, 000102190, 000102208, 000104475, 000117445, 000117446, 000129923, 000129937, 000130330, 000130599, 000130613, 000424065, 000424066, 000424088, 000567879, 001753346, 001753352, 001753367, 001753498, 002077002, 002077007, 002530675, 002654459, 002984656, 002987909
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialCOPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 270 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 764 OR COPPER ALLOY 770 OVERALL
head_styleROUND
head_height0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
fastener_length2.000 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CADMIUM AND DICHROMATE OR DICHROMATE OR ZINC AND ZINC AND DICHROMATE OVERALLDICHROMATE OVERALL
internal_drive_styleSLOT
nonmachine_thread_styleWOOD SCREW (TYPE WD)
nondefinitive_spec/std_data1 TYPE AND 1S STYLE
nonmachine_nominal_thread_diameter0.138 INCHES IN
material_document_and_classificationQQ-B-613 FED SPEC ALL MATERIAL RESPONSES OR QQ-B-626 FED SPEC ALL MATERIAL RESPONSES OR QQ-W-321 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY2,CL3, FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY2,CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5305-00-010-1964
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS111STYLE1S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.875 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
HEAD STYLE: ROUND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1B STYLE
•
INTERNAL DRIVE STYLE: SLOT
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD HEIGHT0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
FASTENER LENGTH0.875 INCHES NOMINAL IN
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
HEAD STYLEROUND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1B STYLE
INTERNAL DRIVE STYLESLOT
MATERIALSTEEL OVERALL
HEAD DIAMETER0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
101964Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FFS111STYLE1S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS111STYLE1S?
FFS111STYLE1S is a SCREW,WOOD.
What parts can replace FFS111STYLE1S?
There is 1 known substitute for FFS111STYLE1S: 101964. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS111STYLE1S?
FFS111STYLE1S is cataloged in the U.S. Government catalog under NSN 5305-00-010-1964. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS111STYLE1S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.