PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-SZ8-X-1-1/4IN.LG.
MS35492-SZ8-X-1-1/4IN.LG. ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The MS35492-SZ8-X-1-1/4IN.LG. is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-9304, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-SZ8-X-1-1/4IN.LG.
NSN: 5305-00-014-9304
FSC: 5305
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
Part NumberMS35492-SZ8-X-1-1/4IN.LG.
NSN5305-00-014-9304
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-SZ8-X-1-1/4IN.LG. · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
FASTENER LENGTH: 1.203 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
FASTENER LENGTH1.203 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
385706Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST2CSZ8Interchangeable
interchangeable cross-reference
interchangeable
149307Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
MS35492-SZ8-X-2IN.LG.Interchangeable
interchangeable cross-reference
interchangeable
MS35492-58Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-SZ8-X-1-1/4IN.LG.?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-SZ8-X-1-1/4IN.LG.?
MS35492-SZ8-X-1-1/4IN.LG. is a MS35492-SZ8-X-1-1/4IN.LG..
What parts can replace MS35492-SZ8-X-1-1/4IN.LG.?
There are 9 known substitutes for MS35492-SZ8-X-1-1/4IN.LG.: 385706, FF-S-111 TY1ST2CSZ8, 149307 and 6 more. Substitute compatibility should be verified for your specific system.
Is MS35492-SZ8-X-1-1/4IN.LG. still available?
MS35492-SZ8-X-1-1/4IN.LG. is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-SZ8-X-1-1/4IN.LG.

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026