PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-58
MS35492-58 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, fastener_length: 1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, special_features: FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO.POS3912884, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-722-4632, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-58
NSN: 5305-00-722-4632
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
fastener_length1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
special_featuresFLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO.POS3912884
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleWOOD SCREW (TYPE WD)
nonmachine_nominal_thread_diameter0.164 INCHES IN
surface_treatment_document_and_classificationASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN5305-00-722-4632
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-58 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
SPECIAL FEATURESFLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO.POS3912884
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD STYLEFLAT COUNTERSUNK
FASTENER LENGTH1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
MS35492-254Interchangeable
interchangeable cross-reference
interchangeable
MS35492-SZ8-X-1-1/4IN.LG.Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
385706Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST2CSZ8Interchangeable
interchangeable cross-reference
interchangeable
149307Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-58?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-58?
MS35492-58 is a SCREW,WOOD.
What parts can replace MS35492-58?
There are 17 known substitutes for MS35492-58: MS35492-254, MS35492-SZ8-X-1-1/4IN.LG., FF-S-111 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35492-58?
MS35492-58 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-722-4632. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-58

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026