PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-586
MS35492-586 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, fastener_length: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN, special_features: MATERIAL - CARBON STEEL, countersink_angle: 81.0 DEGREES NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-901-3142, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-586
NSN: 5305-00-901-3142
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
fastener_length2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
special_featuresMATERIAL - CARBON STEEL
countersink_angle81.0 DEGREES NOMINAL
surface_treatmentZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.190 INCHES IN
surface_treatment_document_and_classificationASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN5305-00-901-3142
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-586 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
FASTENER LENGTH: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
HEAD STYLEFLAT COUNTERSUNK
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FASTENER LENGTH2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
COUNTERSINK ANGLE81.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
149926Interchangeable
interchangeable cross-reference
interchangeable
ANSI-B18.6.1Interchangeable
interchangeable cross-reference
interchangeable
MS35493-230Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
151001Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST1CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-586?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-586?
MS35492-586 is a SCREW,WOOD.
What parts can replace MS35492-586?
There are 16 known substitutes for MS35492-586: 149926, ANSI-B18.6.1, MS35493-230 and 13 more. Substitute compatibility should be verified for your specific system.
Is MS35492-586 still available?
MS35492-586 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-586

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026