PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-111 TY1ST1C
FF-S-111 TY1ST1C ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, head_style: PAN, head_height: 0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, fastener_length: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN, special_features: THREADS: 11 THREADS PER INCH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-9926, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-111 TY1ST1C
NSN: 5305-00-014-9926
FSC: 5305
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
head_stylePAN
head_height0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
fastener_length2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
special_featuresTHREADS: 11 THREADS PER INCH
countersink_angle81.0 DEGREES NOMINAL
surface_treatmentZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 1 STYLE
nonmachine_nominal_thread_diameter0.190 INCHES IN
NSN5305-00-014-9926
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-111 TY1ST1C · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
FASTENER LENGTH0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MS35493-230Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
ANSI B18.6.1Interchangeable
interchangeable cross-reference
interchangeable
151001Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST1CInterchangeable
interchangeable cross-reference
interchangeable
MS35492-55-SZ8X1-1/8X5/32IN.-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-111 TY1ST1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-111 TY1ST1C?
FF-S-111 TY1ST1C is a SCREW,WOOD.
What parts can replace FF-S-111 TY1ST1C?
There are 10 known substitutes for FF-S-111 TY1ST1C: MS35493-230, FF-S-111, ANSI B18.6.1 and 7 more. Substitute compatibility should be verified for your specific system.
Is FF-S-111 TY1ST1C still available?
FF-S-111 TY1ST1C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-111 TY1ST1C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026