PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-31

MS35492-31 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, fastener_length: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM OR ZINC OVERALL. This part is cataloged in the Federal Logistics Information System under NSN 5305-00-900-2549, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-31
NSN: 5305-00-900-2549
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
fastener_length0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM OR ZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 1C STYLE
nonmachine_nominal_thread_diameter0.138 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5305-00-900-2549
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-31 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1C STYLE
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
TECHNICAL CHARACTERISTICS
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1C STYLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
FASTENER LENGTH0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD DIAMETER0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
FF-S-111 TY1ST2SInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-S-111InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ANSI B18.6.1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS35492-598InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-S-111DInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS35492-98InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-31?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-31?
MS35492-31 is a SCREW,WOOD.
What parts can replace MS35492-31?
There are 13 known substitutes for MS35492-31: FF-S-111 TY1ST2S, FF-S-111, ANSI B18.6.1 and 10 more. Substitute compatibility should be verified for your specific system.
Is MS35492-31 still available?
MS35492-31 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-31

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026