PartsTable
Technical Data Sheet
Download PDF

MS35492 — SCREW,WOOD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35492: SCREW,WOOD.

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN, fastener_length: 2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, internal_drive_style: CROSS RECESS TYPE 1. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-014-9394, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492
NSN: 5305-00-014-9394
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
fastener_length2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 2C STYLE AND 12 SIZE
nonmachine_nominal_thread_diameter0.216 INCHES IN
NSN5305-00-014-9394
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
FASTENER LENGTH: 2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2C STYLE AND 12 SIZE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
FASTENER LENGTH2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD STYLEFLAT COUNTERSUNK
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2C STYLE AND 12 SIZE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MATERIALCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
HEAD DIAMETER0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 4
FF-S-111 TY1ST2CSZ12Reference document
Same NSN cross-reference
Reference document — Secondary reference
149394Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-111Reference document
Same NSN cross-reference
Reference document — Secondary reference
ANSI-B18.6.1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS35492?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492?
MS35492 is a SCREW,WOOD.
What parts can replace MS35492?
There are 4 known substitutes for MS35492: FF-S-111 TY1ST2CSZ12, 149394, FF-S-111 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35492?
MS35492 is cataloged in the U.S. Government catalog under NSN 5305-00-014-9394. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.