PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-111 TY1ST2CSZ12
FF-S-111 TY1ST2CSZ12 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN, fastener_length: 2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, internal_drive_style: CROSS RECESS TYPE 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-9394, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-111 TY1ST2CSZ12
NSN: 5305-00-014-9394
FSC: 5305
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
fastener_length2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 2C STYLE AND 12 SIZE
nonmachine_nominal_thread_diameter0.216 INCHES IN
NSN5305-00-014-9394
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-111 TY1ST2CSZ12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2C STYLE AND 12 SIZE
•
FASTENER LENGTH: 2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MATERIALCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
HEAD STYLEFLAT COUNTERSUNK
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2C STYLE AND 12 SIZE
FASTENER LENGTH2.438 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
HEAD DIAMETER0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
149394Interchangeable
Same NIIN cross-reference
interchangeable
FF-S-111Interchangeable
Same NIIN cross-reference
interchangeable
MS35492Interchangeable
Same NIIN cross-reference
interchangeable
ANSI-B18.6.1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-111 TY1ST2CSZ12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-111 TY1ST2CSZ12?
FF-S-111 TY1ST2CSZ12 is a SCREW,WOOD.
What parts can replace FF-S-111 TY1ST2CSZ12?
There are 4 known substitutes for FF-S-111 TY1ST2CSZ12: 149394, FF-S-111, MS35492 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-111 TY1ST2CSZ12?
FF-S-111 TY1ST2CSZ12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-9394. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-111 TY1ST2CSZ12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026