PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35460-5
MS35460-5 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-206-2224, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35460-5
NSN: 5305-00-206-2224
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL IN
fastener_length0.750 INCHES NOMINAL IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPHOSPHATE OVERALL
width_across_flats0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-206-2224
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35460-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM YIELD STRENGTH: 140000 POUNDS PER SQUARE INCH LBS
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
INTERNAL DRIVE STYLE: HEXAGON
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNF
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
THREAD QUANTITY PER INCH: 40
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM YIELD STRENGTH140000 POUNDS PER SQUARE INCH LBS
SURFACE TREATMENTPHOSPHATE OVERALL
INTERNAL DRIVE STYLEHEXAGON
THREAD LENGTH0.750 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNF
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
THREAD QUANTITY PER INCH40
HEAD DIAMETER0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
30179Interchangeable
interchangeable cross-reference
interchangeable
710034Interchangeable
interchangeable cross-reference
interchangeable
9185Interchangeable
interchangeable cross-reference
interchangeable
645 STEM WITH 7250 COREInterchangeable
interchangeable cross-reference
interchangeable
10034Interchangeable
interchangeable cross-reference
interchangeable
FF-B-187BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35460-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35460-5?
MS35460-5 is a SCREW,CAP,SOCKET HEAD.
What parts can replace MS35460-5?
There are 23 known substitutes for MS35460-5: 30179, 710034, 9185 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35460-5?
MS35460-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-206-2224. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35460-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026