PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 710034
710034 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: RUBBER SYNTHETIC PACKING, cone_width: 1.8125 INCHES NOMINAL IN, construction: ONE-PIECE, bore_diameter: 2.6875 INCHES NOMINAL IN, outside_diameter: 1.250 INCHES NOMINAL IN, style_designator: NORMAL ANGLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710034
NSN: 3110-00-100-3130
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
cone_width1.8125 INCHES NOMINAL IN
constructionONE-PIECE
bore_diameter2.6875 INCHES NOMINAL IN
outside_diameter1.250 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
surface_treatmentCADMIUM RETAINER
cone_corner_radius0.1406 INCHES NOMINAL IN
retainer_thickness0.050 INCHES NOMINAL IN
packing_inside_diameter0.743 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
packing_ring_cross-sectional_diameter0.072 INCHES NOMINAL IN
NSN3110-00-100-3130
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 710034 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.6875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 1.8125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH1.8125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
645 STEM WITH 7250 COREInterchangeable
interchangeable cross-reference
interchangeable
10034Interchangeable
interchangeable cross-reference
interchangeable
FF-B-187BInterchangeable
interchangeable cross-reference
interchangeable
H936340H936310Interchangeable
interchangeable cross-reference
interchangeable
S2603-860341Interchangeable
interchangeable cross-reference
interchangeable
9185Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710034?
710034 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 710034?
There are 24 known substitutes for 710034: 645 STEM WITH 7250 CORE, 10034, FF-B-187B and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710034?
710034 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710034

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026